Mineral Content of Cycle Water

Clean fuel for life.

Cycle Water’s testament to sustainability is an ever-growing endeavor. We work with a series of industry experts to ensure our product retains a high degree of quality at each step of the journey. It all starts here, with our report of the water’s quality, as well as the mineral content of Cycle Water.

keep reading
wave

What is a Mineral Report?

A mineral report like the one featured here will contain a complete list of the minerals found in Cycle Water. The necessary tests were conducted by a handful of labs listed below, and they’ve helped us determine a thorough understanding of the mineral content of Cycle Water.

Compounds
Results (mg/L)
PQL
MDL
Calcium
32.6
0.50
0.03
Hardness as Calcium Carbonate
121.4
3.30
0.034
magnesium
9.72
0.50
0.002
potassium
ND
1.00
0.08
sodium
1.03
0.50
0.04
Electrical Conductivity
257 uS/cm
10.0
-
Hydrogen ION (pH)
7.72-8.0
-
-

Water Properties and Secondary Inorganic Parameters

Compounds
Results (mg/L)
SOQ
MRL
Aluminum
ND
0.20
0.01
Chloride
0.7
250
0.10
Copper
ND
1.00
0.01
Iron
ND
0.30
0.05
Manganese
ND
0.05
0.00
Silver
ND
0.03
0.01
Sulfate
4.1
250
10.0
Zinc
ND
500
10.0
Total Dissolved Solids (TDS)
130
5.00
0.05

Inorganic Chemicals (IOCs)

Compounds
Results (mg/L)
SOQ
MRL
Antimony
ND
0.006
0.001
Arsenic
ND
0.01
0.001
Barium
0.036
1
0.1
Beryllium
ND
0.004
0.001
Cadmium
ND
0.005
0.001
Chromium
ND
0.05
0.001
Cyanide
ND
0.1
0.04
Fluoride
ND
2
0.1
Lead
ND
0.005
0.001
Mercury
ND
0.001
0.0002
Nickel
ND
0.1
0.001
Nitrate-N
0.19
10
0.1
Nitrite-N
ND
1
0.1
Total Nitrate/Nitrite
0.19
10
0.1
Selenium
ND
0.01
0.005
Thallium
ND
0.002
0.001

Notation(s):

A result of "ND" indicates that the compound was not detected above the Labs Reporting Limits.

PLQ = Practical Quantitation Limit is the Lowest level that can be achieved within specified limits of precision and accuracy during routine laboratory operating conditions.

SOQ = Standard of Quality, maximum permissible level of a contaminant in water established by EPA, USEPA Region 10.

MRL = Method of Reporting Limit

The analysis was provided by:

Edge analytical laboratories logo

Additional services are also carried out by Caduceon Laboratories and/or  National Testing Laboratories. These labs run smaller, less invasive studies on our source water and/or product, to ensure that all industry standards are met. (currently not shown).  We also have a hydrogeologist on board who evaluates these findings and helps to maintain our natural spring's quality and sustainability.